Roll Grooving EquipmentHi, my name’s Mike from RIDGID, and I’m going to run through a range of Roll Grooving Machinery. Start here, 915 unit will do2 through to 12-inch pipe, 6 Nautical Home Décor Ideas and as you can see, it’s a manual machine. It’s an in situ machine for when you want to do a grooveon an existing line, and you have to do it in situ. Moving up to groovers that run on machines,916 would be driven by a threading machine,and does 2 through to 6-inch pipe.918 is a hydraulic machine, and would do 2 through to 12-inch. On the stand here we’ve got the975, this is a hybrid machine.
Today I am going to show you how to take apart the iPhone 5 and replace the battery. It is actua… As you can see, it can be hand-driven, or by the addition of the side bars here,you can actually put the drive shaft into a threading machine,and use it on a threading machine, 2 to 6-inch with the 975. Moving on up, 918. Here’s a 918 unit, this time with its own power driveon the back. We’ve added here on the 918 a stabilizer unit, so if you want to do grooves on short lengthsof tube, that’s a useful attachment. And then lastly, driven off the RIDGID 300 power drive we’ve got the model 920 Roll Groover,so a hydraulic machine that does 2 through to 20-inch pipe, a real fabrication unit.